后方油库整体生存概率分析计算

针对我军后方油库特点,探讨了油库整体生存概率计算的基本思路和方法,分析了各类分项目标生存概率的计算方法,采用层次分析对后方油库各分项目标权值进行了详细分析计算,可为后方油库伪装防护效能评估提供依据。     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

酸性条件下几种锅炉炉管钢腐蚀性能分析

研究了几种锅炉炉管钢在 p H=3的 H2 SO4 溶液中腐蚀速率的差异 .电化学测试结果表明 :炉管钢的腐蚀速率与钢中合金元素的种类和含量有一定关系 ;含铬、钼量较高的钢种腐蚀速率较低 .由此可见 ,铬元素是抑制炉管钢在酸性介质中发生腐蚀的最主要的合金元素 ,其他元素如钼、镍等对炉管钢的腐蚀性能也有重要影响     

液体火箭发动机非线性燃烧不稳定过程的并行仿真

采用计算燃烧学方法对火箭发动机非线性燃烧不稳定工作过程进行了并行数值模拟。气相控制方程组用欧拉坐标系下的Navier Stokes方程组描述 ,液相控制方程组在Lagrangian坐标系下进行描述。气、液两相作用通过方程组的源项互相耦合。编制了串行和并行程序 ,并在并行计算环境下进行了测试。从计算结果可以看出并行计算的效率较高。     

附连水质量的边界元法求解

研究了计算水下结构动态响应中附连水质量的边界元方法;根据数值积分和边界元法的原理,应用直线单元对结构边界进行离散,将原有表达形式中复杂的曲线积分转化成可直接计算的数值积分形式,从而解决了奇异积分的问题;得到了更适于直接计算的系数矩阵和向量的表达形式,使边界元法更方便地应用于计算无限流场中不规则截面物体的附连水质量.最后,给出了典型算例,并与经典计算结果比较,误差均在4%以内.     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

固定翼反潜巡逻机作战效能评估

运用改进的Topsis评估模型对反潜巡逻机的作战效能进行评估,主要是对指标权重的计算方法进行改进:综合考虑客观熵权和专家主观权重得到综合权重,通过客观的熵权信息来调整主观权重的偏差,使得反潜巡逻机作战效能的评价结果更为合理。实例分析表明,该方法能够主客观相结合,简单有效,具有一定的推广应用价值。     

模型三组元喷嘴雾化SMD变化规律

为了充分研究新型三组元喷嘴的内混腔雾化特性 ,设计了模型喷嘴进行多工况试验。试验发现 ,维持气体或液体压降不变 ,改变另一种介质的压降 ,会得到不同的雾化平均直径随气体压降或液体压降 ,以及气液比ALR的变化曲线 ,这些曲线有着明显的规律。大量试验表明 ,虽然平均直径SMD随气体压降或液体压降的变化曲线明显不同 ,但其随气液比的变化规律却趋于相同